FloChem RO Antiscalant

Static overlay
Informasi Produk

FloChem RO-4 adalah antiscalant multifungsi dan antifoulant untuk sistem reverse osmosis, sangat efektif dalam mengendalikan kristalisasi dan pengotoran partikulat pada permukaan membran. FloChem RO-4 akan mengontrol pengendapan kerak CaCO3, CaSO4, BaSO4, dan CaF2.
FloChem RO-4 diformulasikan untuk mengontrol zat besi yang larut dan tidak larut serta secara aktif mendispersikan partikulat. FloChem RO-4 efektif melawan pengotoran silika. FloChem RO-4 dirancang untuk digunakan dalam membran Film Tipis dan CA.

General Product Information

FloChem RO-4 is a multifunctional antiscalant and antifoulant for reverse osmosis systems, highly effective in controlling both crystallization and particulate fouling of membrane surfaces. FloChem RO-4  will control CaCO3, CaSO4, BaSO4, and CaF2  scale deposition. FloChem RO-4  is formulated to control both soluble and insoluble iron and actively disperse particulates. FloChem RO-4  is effective against silica fouling. FloChem RO-4  is designed for use in Thin Film and CA membranes.

Product Properties

The following are typical properties for FloChem RO-4 and should not be regarded as specification limits for the product. A product specification is available on request.

Appearance: pale yellow liquid

pH: 2.0 maximum 

Specific gravity at 25 ºc: 1.06 to 0.02

Boiling point range: 100 to 102ºc

Freezing point range: 0 to – 10ºc

Thermal Stability:

Thermogravimetric analysis and differential scanning calorimetry have shown that FloChem RO-4 is stable up to a temperature of 200ºc.

Chemical Reactivity: 

FloChem RO-4  is not affected by chlorine or other oxidizing biocides under normal conditions  of use. FloChem   RO-4 may be used in membrane systems using chlorine an sodium metabisulphite.

Application and Dose Level

FloChem RO-4  is an aqueous solution of or organic acid and is corrosive in concentrated form. Corrosion resistant dosing equipment must therefore be used. Examples of suitable material are 316L stainless steel, or plastic such as GRP, PVC and PE. Recommended injection point  is into the feed water downstream of any filtration equipment and cartridge filters. 

FloChem RO-4  is miscible with water all proportions. It may be applied as the neat product, or as a solution in distillate. A minimum dosing solution strength of 10% w/w is recommended. FloChem RO-4  should be dosed continuously, and proportionately to the feed water flow, to maintain the recommended dose level.

The  dose level required is dependent on the quality of the feed water and the saturation indices of the  various scale forming species present in the concentrated brine. Usual dose level range between 5 – 15  ppm.

Handling & Safety 

Keep out of reach of children. Avoid contact with eye, skin or clothing. In case of accidental splashed – flush with plenty of water. And for eye contact, should have a medical attention as a safety measure.


Produk ini bisa didapatkan di official store kami di Tokopedia, Bukalapak, Blibli, Shopee, atau Lazada. Anda juga dapat menghubungi sales kami di nomor telepon (WA) 081319777250.

Pemesanan Langsung


Dapatkan Penawaran Menarik

Daftarkan e-mail Anda untuk mendapatkan up-date terbaru produk-produk kami dan penawaran dengan harga terbaik!

Kami tidak membuat spam